http://jinfatie.bokee.net   http://neckwear.bokee.net

Company Profile

One of the leading neckwear manufacturers and suppliers in China, Shengzhou Jinfa Necktie Co., Ltd is specialized in producing and customizing competitive and quality neckwear products either OEM-based or self-branded, including Jacquard or woven, yarn dyed or printed silk or polyester neckties, scarves, shawls, stoles and bow ties, etc. more>>

Apply to JoinMembers' Blogs

Leave a Message


Verifying Code:

Note: Messages maybe be displayed after being checked by the administrator. Please do not repeat the same message.

Resources & Links

Visits: 1747297

Make a Post - MoreBlog Posts > Something about necktie

Tie, silk tie, silk jacquard tie production

Font Size:big - mid - smallejinfatie   Release time 13-01-18 11:20     view:390   coomment:0   source:

A major production tools

Production tie production tools:

The cutting room: wood, plywood or MDF is made of about 80-100 cm and a width of 120-160 cm (for ease of cutting, can be made into the fold), the length is determined according to the size of the enterprise production.

Scissors: 28-31 cm long, more suitable for cutting fabric. Small scissors yarn scissors, sewing line is more convenient.

Electric scissors: electricity cut and round round straight knife electric shears two kinds. Straight the knife move up and down, more suitable for rigid cloth and large-scale production. The round wheel the electric scissors move forward, suitable for soft cloth.

Layering folder tweezers: mainly used for fabric fixed to avoid crop aliasing.

The 5, boilerplate: for nesting zoned kind.

Sewing machine: universal sewing machine lockstitch sewing machine, medium-speed, high-speed two. Also available household sewing machine. In addition, there is a steam iron, hot station, ruler, angle plates, hot plates, briquetting, stitches and so on.

Second, the ordinary tie production process

The basic process for cutting sewing, after ironing test packaging, storage and transportation processes.

(A) cutting nesting zoned sample material spreading and cutting child aspect.

1 nesting nesting should consider the following:

(1) fabric front and back. Identify the front and back of the fabric is very important. Printed fabrics positive and negative recognition is very easy to generally clear pattern positive and negative fuzzy. Yarn-dyed fabric front flower neat, the opposite of the floating line is very long. Dyeing fabric with white base fabric is difficult to identify Generally, the front of the fabric are relatively flat, smooth and detailed. Watching from the cloth, the front of the general fabric is relatively flat, sometimes positive selvage rolled outwards.

(2) pattern, the pattern of inverted symmetry, aesthetics and the special requirements of the oblique direction of the stripes requirements.

(3) fabric warp and weft.

(4) the fabric color difference.

(5) stripe fabric should consider the the stripe straight, symmetrical.

(6) as much as possible to conserve the use of materials, and reduce costs.

2 zoned kind: the nesting order to go through a program like cutting, zoned kind of method:

(1) The paper zoned kind nesting in one and the same width of fabric tissue, and then use a pen to each template shape painting each scheduled location, so that you can get a nesting again Shop nesting in the fabric of time cutting along the contour line on the fabric. Silk fabrics and high-grade surface material commonly used in this method.

(2) fabric zoned sample template directly in the fabric nesting lined with chalk painting painting materials on the template shape piece of fabric shop materials spread on top, press draw the cutting wheel The Gallery line open cut.

(3) a computer program sample template shape input into computer, discharge use of computer, the row after by the computer-controlled plotter the results automatically drawn into nesting.

3, shop materials shop materials as determined in accordance with the discharge plan kind of length, tie fabric overlapping tile bed in the Conference, to prepare for cutting.

, Crop cutting is a key process in the tie production, the crop must be strictly in accordance with the plan the kind of lines, especially in the tie-lined cutting, will directly affect the quality of the tie finished.

(B) sewing, including a split head, stitched, early hot (mechanisms tie and anti-Alice-tie does not need the early hot), sewing.

l split head also called Baotou, front, is the big tie, small head sewn together with wire. First tie fabrics, small head side of each trimmed into axisymmetric right angle and equilateral. Negative close in the the fabric opposite with wire, wire in the two right-angle side of each fabric right angle side of Qi, top two right angle difference between the suture about 1.5 cm, with off angle head about 1.5 cm seam a wire inside the hypotenuse parallel short-term outside the fold, ironing.

Stitched the bulk of the crop good tie, in access, small head connected together, as well as the connection of the linings, straight requirements junction.

3, the early hot also called flat iron. First one tie the fabric front down flat on the hot table, will tie the middle of the lining on the fabric, and some are still lining the decentralization layer of elastic lining or other interlining, Big Head into the wire, and will be more than lining fabric side snapping lining the edges folded, real hot, and then the other side snapping lining edge folded fabric edge fold into 1 cm to form a fabric opposite the center line of fabrics other side snapping hot with sewing pinned.

4, sewing will be completed early hot tie press on the platen, and then pinned centerline tie negative with needle stitching in line off the bulk of 3.5cm, small head 2.5 a 3cm wrapped line cross seam 1 cm, commonly known as playing the hi end, hand-stitch general 4cm less than 4 pin. However, the mechanism to tie with the anti-Alice-tie. Mechanisms tie and anti-Alice-tie early not hot and sewing. Specific production methods: the lining flat, and has split the first seam then the reverse side of the fabric facing outwards fold the two long sides of Qi along the long edge of 1 cm suture lining the center line of a paragraph-by-paragraph overlapping suture, and then with a fine bars will turn the whole tie. Anti-Alice-tie stitch by hand the same mechanism stitch density generally 3cm less than 12 stitches.

(C) After the Road ironing is to tie sewing ironing, so smooth, crisp. Mechanisms tie should use a hot plate, should also be more than the bulk of the excess lining cut edge with the bulk of the wire, and then inserted into the bulk of the back. Some also in the bulk of 3.5cm small head 2.5 a 3cm at the marked hi knot.

Third, the zipper tie

Zip tie, also known as an (easy) pull-tie, convenient tie, generally with insurance and self-locking function. Basically the same as the zipper tie the bulk of production methods with ordinary tie, a small head and zipper-phase side of the connecting links for both sides of the package bar package slice tight package with a wide package of two tight package zipper bag bars side rolled up. Wide package is to sew the zipper flat volumes bag bars, small head made the two long sides of the crop small head fabrics negative outward suture, then on both sides of the zipper a link to the two insurance fasten put on tie ADS ( also called triangular buckle, pull buckle) and the zipper, the negative outward stitched zipper head connected to the other end and reversal ironing, and then start knotting. Lay the knot in the tie to the opposite laden with a fixed line.

    
In addition, there are some special tie processing, such as knit tie, leather tie, tie beads, double-sided tie, shaped ties, etc., each with its own special processing methods, since these products are few and far between, they will not be included.



Commentcomments (0)


Comment

username:  not register?   password:(guest)

validation code:  

  • Telephone Hotline
86-571-56835059